Stone Flex Hangers: for those who want additional protection for Ezee-On’s already rugged bearings, blades, spools, and gang shafts, Stone flex hangers are available as an option. With the extreme thrust forces present on a disc and potential for rocks in some areas, the Stone-flex hanger is a perfect choice for absorbing those shocks. The 1¼” x 2½” C-shaped spring steel reacts to both vertical, but more importantly, horizontal forces. Disc penetration is not compromised. The scraper bar is integral with the Stone-flex hanger which allows it to move with the gang when the hanger flexes. (Not available with 28” blades or larger.)
Steel Fabricated Spools: Ezee-On discs feature fabricated steel half and full spools as standard equipment. Unlike cast iron spools, steel spools can withstand far greater “shock loads” from rocks or stumps thereby eliminating spool breakage. Compressed to maximum density prior to assembly, Ezee-On’s fabricated spools ensure the gang will not shift and become loose. Ezee-On’s fabricated spools ensure the gang will not shift and become loose. Ezee-On’s large diameter gang shaft combines with steel fabricated spools to result in an effective total outer diameter of 6-5/8” on the gang.
Positive Depth Control: a 5½” heavy duty rockshaft, in greaseable bearings, is the foundation of the single offset disc’s depth control system. A single cylinder with positive depth control segments provides a consistent and repeatable working depth. An adjustable crank allows the operator to regulate the balance of pressure on both gangs. The depth control system is designed for strength, adjustability and ease of maintenance.
Furrow Filler Blades: in order to get the most uniform and consistent working of the field, Ezee-On Offset discs have furrow filler blades as standard equipment. On the larger working widths two furrow fillers are standard, one 2” smaller than the working blades and one 4” smaller, (Only one furrow filler is available on Model 8550). On the smaller working widths one furrow filler 4” smaller than the working blades is standard. These blades along with full sizes blades work together to create a uniform well-worked field.
 
Blade Scrapers: all Ezee-On discs feature one piece, 4” wide blade scrapers made of carbon steel for long wear life. The scrapers are U-bolt mounted for maximum adjustment. Scrapers are mounted on a heavy duty 2” x 2” tubular steel bar. All scrapers are located to the inside of the blade to reduce draft requirements and eliminate the need for trash guards.
Adjustable Gang Angle: all Ezee-On single offset discs allow the operator to customes the gang angle there by causing a more or less aggressive discing action. Soil conditions (i.e. moisture, trash, etc.) vary from season to season, let alone year to year, and only a disc with an adjustable gang angle will perform in these conditions.
Removable Spindle Axles:
Ezee-On’s offset discs are built with maintenance concerns in mind. All spindle axles are designed for easy removal and strength. Each spindle is bolted into a sleeve and can be removed by simply removing the bolt and pulling out the axle. This will save valuable time if repairs to a tire are needed.
Standard Rigid Hanger: heavy built rigid hangers hold strong in the most extreme conditions. The 1225 and 1275 use hangers fabricated from solid 1¼“ high strength steel and clamped onto the gang beam with U-bolts. The 1375 and 8550 use hangers fabricated from 6” x 3” x 3/8” rectangular steel tubing. Both hangers have a slim line contour that gives the maximum strength combined with excellent trash clearance.
 
Choice of Blade Spacing:
Ezee-On single offset discs offer spacing choice that allow everything from primary tillage and breaking (10½”, 12”, 14”) to secondary and finishing operations (9” – 10½”). The 1225 is available in 9” and 10½” spacing. The 1275 is available in 10½” and 12”, and the 1375 and 8550 are at 12” and 14” respectively.
Large Gang Shaft: all Ezee-On discs feature a large 1-15/16” diameter, high carbon steel gang shaft. This gang shaft along with Ezee-On’s steel fabricated spools allows the gang assembly to be torqued at the factory to 3200 ft./lbs.
Optional Pan-Style (Moldboard) Scrapers:
Are available on the 1225, 1275 and the 1375 model discs, which mount low on the disc blade to provide effective cleaning of the disc blade and prevent sticky soils from building up. As a result, the disc cuts cleaner and draft is lighter. All scrapers are adjustable individually or as a group for optimum performance in the field.
 
211 and 410 Series Bearings – Match or exceed that offered on most competitive discs. The 211 Series greaseable bearing feature ten 9/16” balls and has a radial load rating of 7520 lbs @ 33-1/3 RPM. For those applications requiring a medium to heavy-duty bearing, the 410 Series with a radial load raring of 14100 lbs. @ 33-1/3 RPM is an excellent choice. Seven 15/16” steel balls are contained within the 410 Series greaseable bearing. Both the 211 and 410 Series bearings seal shields are included for additional protection from abrasive soils. The 410WSS bearing is 5/16" wider allowing 2, triple lip seals that cannot be overgreased unlike the older 410N bearing.
T2-215 Trunnion Mounted Bearing – the T2-215 series (optional on 1225 -10½” spacing, std. on 1275, 1375 and 8550) is the largest bearing available on Ezee-On discs. Two 215 series bearings are contained within a massive greaseable trunnion type housing. The 215 bearing uses eleven (11) 11/16” steel balls. Two (2) independent 3 ply national “syntech” lip seals contain the twin 215 bearings. Specially designed for high loads and low rotation speeds, the T2-215 has a radial load rating of 22800 lbs. @ 33-1/3” RPM. Pivot points keep the trunnions centered and able to handle shaft deflection. The housing also makes it extremely simple to remove disc gangs, one bolt per trunnion. Bearing wear plates are optional for rocky conditions or where there is a potential for damage to the turnnion housing.
 
Floating Hitch – this feature is standard on all 1375 and 8550 discs but is not available on competitive discs. The floating hitch is important in that it allows the disc to follow irregular ground contours closely. Unlike conventional hitch designs, the floating hitch moves up or down with the tractor without interfering with the operation of the disc. If an obstruction is encountered, the disc simply rolls over it without transferring weight to the front gangs. Blade and bearing damage can be significantly reduced. A spring-cushioned screw crank is provided to make short work of leveling the disc front to rear.
 

Three Year Limited Warranty
3 Year Warranty - At the sole discretion of Ezee-On Manufacturing, defective parts and/or workmanship will be repaired or replaced for the original, non-commercial owner. Coverage is: 1-12 months 100% Parts & Labor, 13-24 months 100% Ezee-On Manufactured Parts, 25-26 months 50% Ezee-On Manufactured Parts.

Seven Year Limited T2-215 Bearing Warranty
7 Year Warrenty - Extended coverage (12-84 months) on T2-215 bearing is limited to the replacement of ball bearings and seals for the original, non-commercial owner. Associated bearing parts, labour, freight, etc., are not covered.

Contact Ezee-On Dealer or Factory for complete warranty details, including exclusions to coverage.